In Stock

TBR10 T-Bar Row Platform

SKU:
TBR10
3 reviews Write a Review
$86.00
T-Bar Row Platform
T-Bar Row Platform
Product Dimensions:
11.00" L x 5.00" W x 6.00" H, 7.00 LBS
Product Specifications & Warranty
Current Stock:
$86.00


Related Products:

T-Bar Row Platform

Description

Fits all standard and Olympic bars. Simply put one end of the bar in the platform cup and load up the other end with all the weight you can handle. The T-Bar Platform features an oversized solid steel axle pivot point with dual bronze Oil-Lite bushings that lock rock-solid to any 2" tubing, or it can be bolted to the floor. Full 360° swivel-ability makes it a dream come true in tight workout quarters. Built for a lifetime of heavy-duty back-blasting workouts! Patent Pending. Cannot be used independently.

Lat blaster bar #LBB28, Olympic bar, and weights optional

Assembled Weight:   7lb / 3.18kg    
         
Assembled Dimensions:   Length Width Height
    11.00in / 279.40mm 5.00in / 127.00mm 6.00in/152.40mm
         
Package Dimensions:   Length Width Height
    11.46in / 291.08mm 5.71in / 145.03mm 6.34in / 161.04mm
    Volume Gross Weight  
    0.24 ft3 / 0.01 m3 8.80lb / 3.99kg  

 

Product Specifications

Exercise Focus:
Multipurpose
Type:
Landmine Accessory
Application/Use:
Commercial
Application/Use:
Residential
Product Data Sheet:

Product Reviews (3)

  • 4

    Much Better than a corner

    This product works as it should and is much better than sticking a bar in a corner. The one thing it lacks is a set screw to retain the bar, but under most usage this is not an issue.

  • 5

    Great Product

    The T-Bar Row Platform is high quality and works to specifications. There is the not mentioned added bonus of a horizontal swivel on the bottom which allows for even greater versatility. I have now purchase 2 units alone with many more products from this company and I am happy with all of them.

  • 4

    Lift Heavy

    This T-bar Row swivel is useful in home gyms to allow you to do a variety of single-ended barbell work. The thumb-screw is a bit wobbly, but once I got it secured, it is stable. The pivot took me a while to get working. The trick is to make sure the bolt in the base of the pivot is tight enough. From the factory, mine was very loose. After you get the basic Row working with the single-ended barbell cradled by either a V-bar or T-bar, check out the Bus Driver Rotation, Drop Squat and Row, or Barbell Squat and One Arm Press.